When choosing an epoxy concrete floor coating, it is important to consider the durability and cost, and also to think about the application process. The application process is important as the coating will be in constant contact with the concrete. The coating is applied with many layers, which prevent chemicals from soaking through. In addition, the layers prevent harmful residue from being left behind.
Durability
There are several factors that determine the durability of an epoxy concrete floor coating. The first factor is the strength of the base layer of concrete. It is recommended that an epoxy concrete floor coating be applied over concrete with a minimum strength of 3000 PSI. If the concrete is weaker than this, you should consider using a densifier to make it stronger.
Epoxy concrete floor coatings are known for their durability. They can withstand chemical stains, tire marks, and general impact. However, they are susceptible to UV heat, which can wear them out and cause them to yellow. If you’re looking to add some style to your garage, an epoxy coating may be a great option.
Another factor to consider when choosing an epoxy concrete floor coating is the amount of maintenance it requires. Water-based kits tend to be on the lower end of the scale. Water-based kits have a dry film thickness of about 2.5-3.5 mils, while commercial-grade epoxy has a dry film thickness of nine to twelve mils per coat.
Cost
There are several aspects to consider when calculating the cost of epoxy concrete floor coatings. First, a floor should be properly prepared for the application. Cracked or damaged areas must be repaired. Then, a primer is applied to create a good base for the epoxy to adhere to. If desired, a texture may be added to the surface.
There are several different types of epoxy available, and these will also influence the price. A water-based epoxy is less expensive than a solid type. It can cost around $30 per gallon, while a solvent-based type may cost as much as $150 per gallon. The cost will vary depending on the extent of prep work needed, and the type of application required. Before beginning the application process, it is advisable to clear the room, move any furniture, and remove all rugs and other items from the floor. This can be accomplished with the help of a moving company or a short-term storage unit.
The cost of epoxy floor coatings varies, but most professionals charge between $3 and $12 per square foot. This is a relatively affordable price for a floor coating that has the potential to last for years. Moreover, the materials used for the application process are widely available, and the labor and equipment involved in the process are generally not expensive.
Application
When applying epoxy concrete floor coatings, you will need to prepare the floor thoroughly. Before you start applying the coating, you should repair any damage on the concrete base, remove any oil stains, and clean and degrease the floor. You should also use a vacuum to clean off any debris from the floor.
This coating can last for years. It is shock-resistant, meaning that it won’t crack or chip even if heavy objects are dropped onto it. It will also not be damaged by cars driving on it or recreational gear falling onto it. And the coating will not chip or peel even after a jarring crash.
Applying epoxy concrete floor coatings is relatively easy if you follow the instructions properly. There are simple eight-step plans and short videos online to help you get started. These will make the process look easy. But once you get into it, you’ll find that there are some finer points to pay attention to.
Epoxy Floor Coatings 