Design a site like this with
Get started

Things to Keep in Mind Before Installing Epoxy Resin Flooring

epoxy resin flooring

If you have been considering installing epoxy resin flooring in your home, there are a few things to keep in mind before you start. These concerns include cost, durability, and the effects of ultraviolet light and sanding on epoxy resin flooring. Keep reading to learn more. Then, you can decide if this type of flooring is right for you.

Cost of epoxy resin flooring

The cost of epoxy resin flooring is dependent on several factors, including the type of epoxy used, the area of the home to be coated, and the contractor’s experience. Water-based epoxy, which is the least expensive type of epoxy, typically costs $30 to $50 per gallon. Solid epoxy, on the other hand, can cost as much as $150 per gallon. However, solid epoxy is significantly more durable and requires less maintenance.

Epoxy floors are easy to clean and are resistant to dents and most stains. They are also resistant to a wide range of traffic. They can be purchased in a variety of colors and patterns. Some manufacturers can even create custom patterns and colors if you want a more unique look.

Durability of epoxy resin flooring

One of the most appealing features of epoxy flooring is its durability. It is one of the toughest industrial and commercial floor finishes available. The lifespan of an epoxy coating is measured in decades. Many can last for 30 years or longer, making it a cost-effective solution over the long term. In addition to its longevity, epoxy flooring is also easy to maintain.

Epoxy resin flooring is ideal for warehouses and factories and is a good option for automobile showroom floor surfaces. This type of flooring is made by combining two chemicals – a synthetic resin and a separate hardener – to form a chemical bond that is stronger than concrete. In addition to these, other substances can be added to the resin to make it thicker and more durable.

Effects of sanding on epoxy resin flooring

When sanding an epoxy resin floor, it’s important to take proper precautions to avoid damaging the floor. First, you should clean the surface thoroughly. This is crucial because a dirty surface may lead to the resin peeling and deteriorating. Also, small bubbles or pinholes can invite moisture, which may compromise the concrete beneath. If your floor develops these problems, professional repair services can help you restore it.

When sanding epoxy resin, you should use a water-resistant sandpaper with a closed layer of silicon carbide. Choose a sandpaper with a grain range of 60 to 1000. Avoid coarse grains, since these can leave deep scratches in the epoxy resin. If you are using a coarse sandpaper, be careful not to apply too much pressure on the floor. This could cause deep scratches that are difficult to fix. Once you have sanded the surface, you should use a polishing compound to clean the surface.

Effects of ultraviolet light on epoxy resin flooring

While UV light can cause permanent damage to a flooring system, there are ways to minimize its effects. For example, installing a UV-blocking sealant can help reduce the risk of fading. UV light can also affect certain materials, including resin flooring. Therefore, a sealant is necessary to protect your floor.

There are several steps in the application process. The first step involves sanding and cleaning the area where the epoxy will be installed. It is critical that you apply an epoxy coating while it is in a ‘green’ stage. If you apply the coating too early, fresh epoxy will no longer bond chemically to the surface.

%d bloggers like this: