Design a site like this with
Get started

Cost to Epoxy Garage Floors

cost to epoxy garage floors

If you are planning to install epoxy garage floors, you will need to consider the cost of doing so. It will vary depending on the type of epoxy you use. Some types are more expensive than others, and you will need to shop around to find a company that offers a reasonable price. You can do some research on your own, or you can speak with a professional before deciding to invest in an epoxy garage floor.

Water-based epoxy

If you want to spruce up your garage floor, epoxy can be a great choice. However, it can be quite expensive. Depending on the type and quality of epoxy you use, you could find yourself spending upwards of $10,000 for a new surface.

You’ll need to remove any dust, dirt, and debris from your concrete before you can even begin applying the epoxy. This can be done with a specialized power washer, sprayer, or squeegee.

Getting an estimate for a floor resurfacing project should include an itemized quote. The average 500-square-foot garage will cost $1,500 to $2,500, depending on the size and the materials you choose.

To get a better idea of what your costs will be, contact a local flooring professional for a free estimate. Typically, your contractor will charge $50 to $150 per hour for epoxy floor installation, depending on the size of your floor and your needs.

100% solids epoxy

The cost of 100% solids epoxy garage floors can be quite high. Luckily, there are a number of ways to save without sacrificing quality.

Before you can begin putting epoxy on your garage floor, you need to prepare the concrete. This can involve sandblasting or acid washing. While it’s possible to perform the preparation yourself, you’ll likely find it easier and more effective to hire a professional.

Some contractors will charge a minimum of $500 for their services. Those with higher budgets may be able to negotiate a discount. If you’re going the DIY route, make sure to get an itemized estimate.

Epoxy flooring can last for years if it’s installed correctly. It’s durable, easy to clean, and resistant to chemicals, water, and shock. You don’t have to replace it as often as other types of garage flooring.

Choosing the best epoxy for your garage is a big decision. You’ll want to choose a material that withstands light foot traffic and can stand up to the rigors of heavy vehicles.


If you are looking to protect your garage floor from stains and damage, then you may consider polyaspartic coating. The benefits of these coatings are impressive. They protect against stains, abrasion and impact.

These coatings are easy to apply and cure within a few hours. They are UV light-resistant and can be applied in a wide range of temperatures. This means that they are ideal for garages.

One major difference between epoxy and polyaspartic coatings is that the latter has a much higher resistance to impact and abrasion. Polyaspartic is also much more flexible than epoxy.

While both flooring types offer excellent protection from impact and damage, epoxy and polyaspartic differ significantly in their application, costs and durability. So, you will need to compare the two in order to decide which is best for your home.

A polyaspartic coating has a very low VOC content and has a very fast drying time. In fact, it can be applied in sub-freezing temperatures.


The cost of Polycuramine for epoxy garage floors is a bit higher than you might expect. It’s a proprietary mix of urethane, epoxy, and polyurea. When applied properly, it provides a smooth, glossy finish.

It’s a great option for homeowners who have been disappointed with previous DIY garage floor kits. Polycuramine is a tough, eco-friendly product that’s durable. However, it’s not as resilient as polyurethane.

As a result, it’s important to know how to apply it. If you do it wrong, you might only get a few months of protection. Even worse, you might end up with discolored sections that hurt the overall appeal of your garage.

Polycuramine is a tough, eco-friendly flooring product that’s durable. While it’s not as resistant to abrasion as polyurethane, it’s still a great choice.

However, it’s not UV stable. That means it will turn yellow when exposed to sunlight. You should also note that the color may vary with each batch you use. This can make it difficult to apply multiple kits.

%d bloggers like this: