Design a site like this with WordPress.com
Get started

Garage Epoxy Floors – Cost, Durability, Slip Resistance, and Maintenance

garage epoxy floors

If you want to buy new flooring for your garage, there are many things to consider. You have to look at the cost, durability, slip resistance, and maintenance.

Durability

The durability of garage epoxy floors depends on the type of floor and the amount of traffic it is subject to. Fortunately, there are ways to make the floor last longer.

One of the best is to use anti-slip additives. This helps increase the surface grip and decrease the chances of injuries.

Another way to improve the durability of garage epoxy floors is to clean it. It is no secret that dust can accumulate on concrete, causing damage. An occasional mop will do the trick.

However, if you have an epoxy garage floor, you will need to clean it frequently. Some manufacturers recommend that you spend at least one hour a day cleaning the floor.

If you are installing a new garage floor, you need to do the right thing to make it last. Make sure that you choose a high-quality material and follow the manufacturer’s instructions. A poor choice of materials or a bad installation job can leave you with a floor with a poor finish.

Slip resistance

If you have a resinous garage floor, you might be concerned about slip resistance. This is because resinous coatings are non-porous and can become slippery when they are wet. There are several ways to combat this problem.

One way is to add an anti-slip additive to the final coat. You can also do this yourself by incorporating sand into your epoxy coating. Sand is a hard, angular material that can provide positive traction.

Another option is to add a colored topcoat. A colored topcoat can help your floor look more attractive.

In addition to adding a non-slip additive, you can also use a rubber mat. These are often used in snowy climates. They are a temporary solution to prevent slipping. When wet, a mat can absorb most liquid spills. During the drying process, you can hang it to speed up the process.

If you need more aggressive slip resistance, you can choose aluminum oxide. Although it is not the most attractive anti-skid option, it does provide good grip in wet conditions.

Ease of maintenance

If you have epoxy floors in your garage you need to make sure they are properly cleaned and maintained. Proper maintenance will not only extend the life of your flooring, it can also improve the look of your garage.

First, check for large stains. These can easily be cleaned with a squeegee. You should also sweep the floor once or twice a week depending on how much dirt accumulates.

Next, clean the floor with a good vacuum. Make sure you have a dust mop on hand. A broom or a shop vacuum with a soft brush attachment can help you get rid of loose debris.

Finally, be careful not to scratch your epoxy floor. Continuous abrasion can wear it out before its time. It can also leave a haze on the surface, which is not good for anyone.

You can also refresh your epoxy floors with a little dish soap and warm water. However, do not use harsh chemicals or abrasive cleaners.

Cost

If you’re considering installing a garage epoxy floor, it’s important to get an accurate estimate. There are many variables that will affect the cost. This includes your location, the type of product you choose, and the amount of work required.

The costs of epoxy garage floors vary depending on the size of the project, the number of cars, and the materials used. Larger projects also benefit from economies of scale.

An average 500-square-foot garage will cost between $1,500 and $2,500 for concrete resurfacing services. You can also save up to 20% by choosing to do the project during off-peak times.

Costs will increase if the project requires the use of premium materials. High-quality paints can range from $15 to $30 per square foot. Polyurethane resin is perfect for garage floors as it provides extra UV stability and abrasion resistance.

Installing an epoxy floor requires a variety of tools. Depending on the type of surface being covered, you may need to remove dirt and other contaminants. A foam mop can be used to wipe the entire floor, or a squeegee can be used to pick up dirt.

Advertisement
%d bloggers like this: